12
Full Suspension Vertical: Shock-to-battery Wire Lengths
Top Tube Wire Routing
• If you are routing your wire along the top tube from the shock to the battery, use a
length of cable housing to measure the distance from the upper shock bolt (with the
shock in its fully extended position) to the upper water bottle cage bolt.
• Add 100 mm to that value to accommodate shock travel and actual wire connection
locations.
• Round up to the next stock iCD wire length offered (see “Shimano Wire Part Numbers”
on page 2).
Down Tube Wire Routing
• If you plan to route your wire along the down tube from the shock to the battery, use
a length of housing to measure the distance from the upper shock bolt to the upper-
most water bottle cage bolt.
Comments to this Manuals