Shimano EW-SD50 User Manual download pdf (Page 10)

• With the switch mounted on the left side of the handlebar, Descend mode is actuated

by switch rotation to the bottom, and Climb mode is actuated by switch rotation to

the top.

• The switch can be mechanically reconfigured to provide Climb mode activation in

either direction, for both left and right switch mounting setups. For more information,

see “Changing Switch Configuration” in the FOX Float iCD Owner’s Guide.

4. Determine switch-to-fork wire length for all bike types:

• Measure from the underside of the handlebar, near the inside edge of the grip where

you plan to locate your switch, to the front/centermost point of the bottom of the

head tube (at the crown-race/headset base plate).

• Add 50 mm to your measurement, then round up to the next closest available iCD

wire length offered to ensure having enough slack (see “Shimano Wire Part Numbers”

on page 2).

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

No comments

Shimano EW-SD50 User Manual Page 10