Shimano SM-BMR2 Specifications Page 20
- Page / 49
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
20
INSTALLATION
Installation of the dual control lever
Open up the bracket cover from the front, and then use a 5 mm Allen key to tighten the mounting nut in order to secure the lever
unit.
Bracket cover
5mm Allen key
Tightening torque:
6 - 8 N·m {52 - 69 in. lbs.}
When installing the components to carbon frame/handle bar surfaces, verify with the manufacturer of the carbon frame/parts for
their recommendation on tightening torque in order to prevent over tightening that can cause damage to the carbon material and/
or under tightening that can cause lack of fixing strength for the components.
Installation of the brake cables
Cables used
Inner cable ... 1.6 mm dia. SLR outer casing ... 5 mm dia.
Use cables which are long enough so that they still have some slack even when the handlebars are turned as far as they will
go to the left and to the right.
1.
Gently pull the brake lever.
2.
Pass the inner cable through from directly in front, set the inner cable drum
into the cable hook, and then install the outer casing from the opposite side.
Outer casing
Inner cable drum
Cable hook
- 6770 Series 1
- IMPORTANT NOTICE 4
- TO ENSURE SAFETY 5
- <SM-BTR1: Battery> 10
- <System power reset> 13
- Built-in type (SM-JC41) 15
- External type (SM-JC40) 15
- SYSTEM CONFIGURATION DETAILS 16
- SPECIFICATIONS 18
- Battery charger 19
- Battery charger cord 19
- INSTALLATION 20
- Installation of the protector 21
- When installing a band type 22
- 0.5 - 1.0 mm 22
- Installation of the chain 23
- Tightening torque: 26
- Checking connections 29
- At front derailleur 32
- At junction (A) 32
- At battery mount 32
- At rear derailleur 32
- Installation of the grommets 35
- ADJUSTMENT 36
- 0 - 0.5 mm 39
- <Low adjustment> 39
- <Top adjustment> 39
- OTHER FUNCTIONS 40
- MAINTENANCE 41
- Assembly of the switch unit 42
- 0.18 N·m {1.5 in. lbs.} 43
- Replacement of the pulley 44
- HANDLING THE BATTERY 45
- BATTERY CHARGER 46
- Charging the battery 47
- Troubleshooting 47
- INSTRUCTIONS 48
Related products and manuals for Bicycles Shimano SM-BMR2
Bicycles Shimano ST-6870 User Manual
(10 pages)
(10 pages)
Bicycles Shimano SM-BA01 User Manual
(1 pages)
(1 pages)
Vega VEGABAR 40 HART manuels
Manuels d'utilisation et guides de l'utilisateur pour Équipement Vega VEGABAR 40 HART.
Nous fournissons des manuels en pdf 6 Vega VEGABAR 40 HART à télécharger gratuitement par type de document : Manuel de l'utilisateur
Comments to this Manuals