Shimano FlightDeck SC-6502 Specifications download pdf (Page 25)

The hours will advance when switch

“A” is pressed. If switch “A” is

pressed continuously, the hours will

advance rapidly. Press switch “B”

once to set the hour.

The minutes section will then start

flashing as shown in Fig 15.

Set the minutes in the same

procedure as for setting the hours.

The clock will then start.

Note; To reset clock

Fig.14

Fig.15

[]

Example

If the time is 10:46:23

････ 10:47: - -

If the time is 13:59:16

････ 14:00: - -

Get a display where CLK appears on the sub - display. Press switch

“B” for 5 seconds or more to change the time setting.

(

)

Setting the time

(

24 hour format

)

The display will change to that

shown in fig 14.

Set the time to one minute later than

the current time.

This completes the data entry operations. The display will now return to

the normal display mode.

Insert the battery so that the “+”

side is visible as shown in Fig. 16,

and then tighten the battery cap.

The battery which is installed at the

time of purchase is for monitoring

purposes. If the low

battery indicator appears, replace

the battery as soon as possible.

Carry out the initialization

procedure after the battery has

been replaced.

Replacing the battery (CR-2032 battery)

Open

Fig.16

CR-2032

1 2 ... 20 21 22 23 24 25 26

Comments to this Manuals

No comments

Shimano FlightDeck SC-6502 Specifications Page 25

Comments to this Manuals

Related products and manuals for Bicycle accessories Shimano FlightDeck SC-6502